Project Description

G-TEC High Flow Heated Flusher

TTCF-9B

SKU: 40400061

Heavy Duty Base Unit – Heated Component Flusher – Transmission Cooler System and Hydraulic System Flusher

The Flo-Dynamics TTCF-9B Base Unit High Flow Hydraulic System Flusher will flush and clean transmission coolers and lines or any hydraulic system of contamination, sludge and varnish deposits, and particles from a failed transmission. The TTCF-9B has a flow rate of 8 GPM to clean heavy duty transmission cooling systems requiring high flow rates. Using the same hydraulic fluid as the hydraulic system being flushed and cleaned, select from two preset air injected scrubbing action flush patterns, or perform a manual flush. Check system cleanliness with the reusable 60 micron screen filter. The TTCF-9B has a preset heater that heats to 140°F in 45 minutes. Two manually-selected flush patterns designed to inject the optimal amount of air creating an agitating scrubbing action to remove trapped debris and solidified waxy varnish. Easily switch flow direction without removing service hoses during and between flush cycles with the reverser valve. Flush with or without heat with using separately controlled motor/pump and heater switches. PATENT PENDING.

G-TEC High Flow Heated Flusher

TTCF-9B

SKU: 40400061

Heavy Duty Base Unit – Heated Component Flusher – Transmission Cooler System and Hydraulic System Flusher

The Flo-Dynamics TTCF-9B Base Unit High Flow Hydraulic System Flusher will flush and clean transmission coolers and lines or any hydraulic system of contamination, sludge and varnish deposits, and particles from a failed transmission. The TTCF-9B has a flow rate of 8 GPM to clean heavy duty transmission cooling systems requiring high flow rates. Using the same hydraulic fluid as the hydraulic system being flushed and cleaned, select from two preset air injected scrubbing action flush patterns, or perform a manual flush. Check system cleanliness with the reusable 60 micron screen filter. The TTCF-9B has a preset heater that heats to 140°F in 45 minutes. Air injection agitates the system causing a scrubbing action, removing trapped debris and solidified waxy varnish deposits. Easily switch flow direction without removing service hoses during and between flush cycles with the reverser valve. Flush with or without heat with using separately controlled motor/pump and heater switches. PATENT PENDING.

Features

  • Powerful 3/4 HP motor
  • Requires a dedicated 20-amp or two separate 15-amp circuits
  • 13’ heavy duty 3/4” service hoses
  • 10 gallon transmission fluid capacity with easy to read level sight glass
  • 8 GPM flow rate
  • Low fluid heater cutoff float switch
  • 60 micron cleanable screen filter
  • Reverser valve allows easy flow reversal without changing service hoses during and between flush cycles
  • Select from two preset flush patterns or manual air purge to additionally agitate during flushing and to clear service lines and cooling system after flushing
  • 1500 watt heater set at 140°F
  • Temperature gauge
  • Flush with or without heat
  • Two non-bypass spin-on magnetic replaceable system filters (P/N 40300272)
  • Hour run meter
  • 10” semi-pneumatic tires

Features

  • Powerful 3/4 HP motor
  • Requires a dedicated 20-amp or two separate 15-amp circuits
  • 13’ heavy duty 3/4” service hoses
  • 10 gallon transmission fluid capacity with easy to read level sight glass
  • 8 GPM flow rate
  • Low fluid heater cutoff float switch
  • 60 micron cleanable screen filter
  • Reverser valve allows easy flow reversal without changing service hoses during and between flush cycles
  • Select from two preset flush patterns or manual air purge to additionally agitate during flushing and to clear service lines and cooling system after flushing
  • 1500 watt heater set at 140°F
  • Temperature gauge
  • Flush with or without heat
  • Two non-bypass spin-on magnetic replaceable system filters (P/N 40300272)
  • Hour run meter
  • 10” semi-pneumatic tires

Available Adapter Kits

  • P/N 40201346 Allison Adapter Kit (Includes 2 each: Connection Hoses, -8 (1/2 JIC), -12 (3/4 JIC), -16 (1” JIC), -20 (1-1/4” JIC))

  • P/N 40300434 Automotive to TTCF Adapter Kit (Reduces heavy duty hose couplers to fit automotive adapters.)

Available Adapter Kits

  • P/N 40201346 Allison Adapter Kit (Includes 2 each: Connection Hoses, -8 (1/2 JIC), -12 (3/4 JIC), -16 (1” JIC), -20 (1-1/4” JIC))

  • P/N 40300434 Automotive to TTCF Adapter Kit (Reduces heavy duty hose couplers to fit automotive adapters.)

SPECIFICATIONS TTCF-9B
Dimensions
Weight
Power

    SPECIFICATIONS TTCF-9B
    Dimensions
    Weight
    Power

      Sales Flyer

      Quick Start Instructions

      Hose Charts / Adapters

      Service Part List

      Sales Flyer

      Quick Start Instructions

      Hose Charts / Adapters

      Service Part List