EV Battery Pack Leak Tester
LPLT-100
SKU: 40400062
FORD APPROVED!
The new Test-Quick LPLT-100 by Flo-Dynamics is the most affordable and simple to use low-pressure leak tester on the market. It is the only low-pressure leak tester that is guaranteed to be 100% free of vapor or smoke leak detection dye.
Leak test EV battery packs without contamination, using filtered and moisture-free air to ensure a correct seal after performing service. The LPLT-100 allows for a technician to connect, test, and provide an accurate leak flow rate on the flow meter. Simply switch the control knob to Decay/Off to perform pressure decay testing.
EV Battery Pack Leak Tester
LPLT-100
SKU: 40400062
FORD APPROVED!
The new Test-Quick LPLT-100 by Flo-Dynamics is the most affordable and simple to use low-pressure leak tester on the market. It is the only low-pressure leak tester that is guaranteed to be 100% free of vapor or smoke leak detection dye.
Leak test EV battery packs without contamination, using filtered and moisture-free air to ensure a correct seal after performing service. The LPLT-100 allows for a technician to connect, test, and provide an accurate leak flow rate on the flow meter. Simply switch the control knob to Decay/Off to perform pressure decay testing.
Features
-
Uses only shop air (75 – 175 psi)
-
Supply pressure: 14” WC +/- 1”
-
Tests with 100% filtered and moisture free air
-
Designed in collaboration with Ford Engineering to comply with EV battery pack testing procedures
-
Flow meter and gauge provides two testing modes – leak flow rate or pressure decay
-
Test supply line: 120”, 3048 mm
-
Handheld and lightweight
-
Dimensions: 10 ¾” H x 7” W x 10”D
-
Weight: 9.5 lbs
-
Limited one year warranty
-
Ford approved
Features
-
Uses only shop air (75 – 175 psi)
-
Supply pressure: 14” WC +/- 1”
-
Tests with 100% filtered and moisture free air
-
Designed in collaboration with Ford Engineering to comply with EV battery pack testing procedures
-
Flow meter and gauge provides two testing modes – leak flow rate or pressure decay
-
Test supply line: 120”, 3048 mm
-
Handheld and lightweight
-
Dimensions: 10 ¾” H x 7” W x 10”D
-
Weight: 9.5 lbs
-
Limited one year warranty
-
Ford approved
SPECIFICATIONS | LPLT-100 |
Dimensions | 10 ¾” H x 7” W x 10” D |
Weight | 9.5 lbs. |
Power | 75-175 psi shop air |
SPECIFICATIONS | LPLT-100 |
Dimensions | 10 ¾” H x 7” W x 10” D |
Weight | 9.5 lbs. |
Power | 75-175 psi shop air |